Single Toggle Jaw Crusher Machine
This crusher is a crusher that consists of two jaws, which are composed of two jaws, which simulate the two movements of the animal and complete the material crushing operation. It is widely used in the crushing of various ores and bulk materials in industries such as mining, building materials, roads, railways, water conservancy and chemical industry.Jaw crusher machine is one of the most popular stone-crushing equipment in the world, which is ideally suitable for primary and secondary crushing.
Single toggle jaw crusher is mainly used for coarse crushing and fine crushing of all kinds of materials with compression strength no more than 350MPa.
Shanghai Wuchuan Mining Machinery Co.,Ltd is one of the professional jaw crusher manufacturers& suppliers in China.
Advantage of the Jaw Crusher
1. Simple structure;
2. Reliable operation;
3. Convenient maintenance;
4. Large ratio crushing and high capacity.
5. Low operating cost;
Different types and parameters of jaw crusher
|Model||Feed inlet(mm)||Max Feed size(mm)||Outlet ajusting rang(mm)||Production capacity(t/h)||Speed of main shaft（r/min）||Motor Power(kw)||Weight(except electromotor) (t)||Dimension(mm)|
(1) After the crusher is in normal operation, it can be put into production.
(2) The material to be crushed should be evenly added into the crusher cavity, and side feed or full feed should be avoided to avoid unilateral overload or overload.
(3) During normal operation, the temperature rise of the bearing should not exceed 30 °C, and the maximum temperature should not exceed 70 °C. When the above temperature is exceeded, stop immediately and find out the cause and eliminate it.
(4) Before stopping, the feeding should be stopped first, and the power can be turned off after the material in the crushing chamber is completely discharged.
(5) When crushing, if the parking is caused by the blockage of the material in the crushing chamber, the power supply should be shut down immediately to stop the operation, and the material in the crushing chamber should be cleaned before starting again.
(6) After one end of the seesaw is worn, the adjustable head is used.